7 Series E38 L7 (M73) SAL
Take off cover and rubber block.
Pull out transmission unit.
Take toothed ring off planetary transmission and release.
1.
Planetary transmission
2.
Release
3.
Pinion
4.
Transmission case
Installation:
Openings and bores must be aligned.
Check bearing and, if necessary, drive it out with a suitable
mandrel.
Installation:
Lubricate new bearing with grease and press it in.
A = approx. 1 mm
RA Disassembling and assembling starting motor/transmission gear
BMW AG - TIS
21.02.2013 23:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -