7 Series E38 L7 (M73) SAL
12 51 001
Wiring harness - replacing engine section
(M73)
Note instructions on connecting and disconnecting battery,
refer to General Information MG 12
Switch off ignition.
Remove battery negative line.
Remove complete splash guard.
Remove fan wheel,
refer to 11 52 020
Rotate screws through 90
°
. Remove cover from cylinder head
cover.
Press down detent (2) and remove plug connection (1).
Open clips (1).
Unfasten hose clip (2) from auxiliary hose for air pump.
Disconnect plug-in connection (3).
Unfasten hose clip (4).
Remove upper section of right suction filter housing with mass air
flow sensor.
RA Wiring harness - replacing engine section (M73)
BMW AG - TIS
21.02.2013 23:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
