7 Series E38 L7 (M73) SAL
12 61 280
Removing and installing or replacing oil
pressure switch (M73)
Switch off ignition.
Unfasten oil filter cover to enable engine oil in filter to flow
back into the oil pan.
Installation:
Screw on oil-filter cover tightly.
Check engine oil level and top up with engine oil if necessary.
Disconnect connector.
Unscrew and remove switch.
Tightening torque,
refer to Technical Data 12 61 1AZ
RA Removing and installing or replacing oil pressure switch (M73)
BMW AG - TIS
21.02.2013 23:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -