7 Series E38 L7 (M73) SAL
Release screw (1).
Detach heat exchanger (2) for automatic transmission from
connection on outer jacket for alternator.
Installation:
Replace sealing ring (2).
Do not coat sealing ring with grease. Otherwise leakage problems
may arise. The sealing ring will soften, increase in diameter and
no longer provide proper sealing.
Caution!
Check fluid level in automatic transmission,
refer to Maintenance and General Information MG00.
RA Removing and installing/replacing heat exchanger for automatic transmission (M62
BMW AG - TIS
22.02.2013 00:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -