7 Series E38 L7 (M73) SAL
Installation:
1.
Circlip
2.
Outer discs
3.
Lined discs
Remove axial needle bearing (1) and angled disc (2) from
cylinder C (3).
Lift snap ring (1) out of A clutch.
Note:
The axial play of the A clutch is factory set over the thickness
of the snap ring (1). Mark the snap ring (1) and install at the
same location.
Installation:
Note installation position of snap ring ends.
Align discs on A clutch.
Remove end disc (1) from A clutch.
Note:
The end disc (1) can be identified by its longer teeth.
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
22.02.2013 00:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
