7 Series E38 L7 (M73) SAL
Installation:
Bore (1) in drive plate must be accessible from aperture in oil
pan.
Installation:
Screw special tool 24 2 300 into the threaded bore (1).
If applicable, twist torque converter until bore with special tool
24 2 300 points downwards.
Installation:
Check dowel sleeves.
If necessary, remove dowel sleeves from transmission case and
mount new dowel sleeves in engine block.
Replace damaged dowel sleeves.
RA Removing and installing automatic transmission (A5S 560Z)
BMW AG - TIS
22.02.2013 00:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
