7 Series E38 L7 (M73) SAL
32 00 610
Adjusting front wheel alignment (with KDS)
Caution!
On vehicles with Electronic Damper Control / Dynamic
Stability Control, "steering angle compensation" must be
performed with the BMW Service Tester after every wheel
alignment operation.
Adjust toe and toe-difference angle.
Move steering gear into straight-ahead setting (marks on housing
and steering shaft).
Loosen clamping screws on track rods.
Set toe-in of left and right wheels to specified value,
refer to Technical Data Gr. 32
by turning steering tie rod.
Installation:
Ensure that the ball joints are not twisted.
Tightening Torque,
refer to Technical Data 32 21 4AZ
RA Adjusting front wheel alignment (with KDS)
BMW AG - TIS
22.02.2013 01:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
