7 Series E38 L7 (M73) SAL
Installation:
Dip new shaft seals in final drive gear lube.
Drive in shaft seal firmly with special tool 33 1 230 (impact bush)
in conjunction with special tool 00 5 500 (handle).
Note:
It is possible that the special tool 33 1 230 might have to be
reworked to compensate for casting tolerances on the side cover.
RA Replacing complete locking differential (Type M) - final drive removed -
BMW AG - TIS
22.02.2013 02:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
