7 Series E38 L7 (M73) SAL
33 32 719
Replacing ball joint in lower steering
knuckle/wheel carrier (wheel carrier removed)
Special tools required:
•
33 3 333
•
33 4 191
•
33 4 192
•
33 4 193
•
33 4 194
After installation:
•
Perform chassis alignment check
Remove circlip (1).
Assemble special tools 33 4 191 / 33 4 192 / 33 4 193 and
33 3 333 as illustrated. Slotted side of special tool 33 4 191
must point to wheel carrier.
Extract ball joint by turning nut on special tool 33 3 333 .
Installation:
Install new circlip (1).
Draw in new ball joint (1) with special tools 33 4 191 /
33 4 192 / 33 4 194 and 33 3 333 as far as it will go.
RA Replacing ball joint in lower steering knuckle/wheel carrier (wheel carrier remo
BMW AG - TIS
22.02.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
