bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Checking Service Brake_ High- And Low-pressure Tests > < 9 RA Bleeding Brake System With DSC3 From 09_97, 750i_iL To 09_98|Page 1424
Page 1
background image

34 00 513

Checking parking brake setting (for
inspection)

Note:

If deviations are identified during the following check, the
parking brake must be adjusted:

E46: refer to 34 10 014

E39, E52 and E53: refer to 34 10 014

E38: refer to 34 41 006

E46/E39/E53/E52

Release handbrake lever; it must be possible to turn wheels
easily.

Switch ignition on; indicator light must not be on when handbrake
lever is released.

1st tooth: No braking effect, but indicator lamp can be lit.

2nd tooth: Braking effect must begin, indicator lamp must light up.

E38

Release handbrake lever; it must be possible to turn wheels
easily.

Switch ignition off; indicator light must go off when handbrake
lever is released.

1st tooth: No braking effect, but indicator lamp can be lit.

2nd tooth: Braking effect can begin, indicator lamp must light up.

3rd tooth: Braking effect must begin, indicator lamp must light up.

RA  Checking parking brake setting (for inspection)

BMW AG - TIS

22.02.2013  02:46

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

11 RA Checking Service Brake_ High- And Low-pressure Tests > < 9 RA Bleeding Brake System With DSC3 From 09_97, 750i_iL To 09_98|Page 1424