7 Series E38 L7 (M73) SAL
34 11 000
Removing and installing/replacing brake
linings on both front disk brakes
Special tools required:
•
34 1 050
•
34 1 080
Note:
After completing work:
-
Fully depress brake pedal several times so that brake
linings contact brake disks.
-
When installing new brake linings at front and rear axles,
brake fluid level must be brought up to "MAX" marking.
-
Hold ignition key for at least 30 seconds in position "1"
without starting engine.
This clears a fault entry in the RAM
This prevents the brake wear indicator lamp from lighting
up again.
Necessary preliminary tasks:
•
Remove wheels.
RA Removing and installing/replacing brake linings on both front disk brakes
BMW AG - TIS
22.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
