7 Series E38 L7 (M73) SAL
34 21 320
Removing and installing or replacing both
rear brake disks
Caution!
If the thickness of the brake disks drops below the minimum
level (MIN TH ), the disks must be replaced.
Always replace brake disks in pairs.
If the brake disks are replaced, you must also fit new brake
linings.
Remove wheels.
If necessary, remove and clean brake linings.
After completing work, adjust handbrake,
refer to 34 41 006 .
Unscrew bolts (1). Remove and suspend brake caliper from
vehicle.
Note:
Brake hose remains connected.
Installation:
Tightening torque 34 21 3AZ.
Unscrew bolts and take off brake disk.
Installation:
Tightening torque 34 21 1AZ.
RA Removing and installing or replacing both rear brake disks
BMW AG - TIS
22.02.2013 02:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
