7 Series E38 L7 (M73) SAL
Important!
Do not use any force when removing and installing the brake
unit; the brake unit can be damaged under certain
circumstances.
Carefully pull the brake unit out of the bulkhead swing it out.
Installation:
Install the adapter plate (1).
Replace the gasket (2) if necessary.
Important!
Region (3) of the brake unit is very susceptible to damage that
could lead to the breakdown of the brake unit.
RA Removing and installing / replacing brake booster
BMW AG - TIS
22.02.2013 03:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
