7 Series E38 L7 (M73) SAL
35 31 000
Removing and installing / replacing clutch
pedal
Remove lower left trim panel from instrument panel.
Remove the clutch pedal switch .
Remove retainers.
Push out the bolts (1) and remove the clutch pedal.
Installation:
Assemble the spring above dead centre (2).
Installation:
Check bearing bushes (1) and replace if necessary.
Apply a light coat of grease to bearing bushes (1) and bore
(2),
refer to BMW Service Operating Fluids.
RA Removing and installing / replacing clutch pedal
BMW AG - TIS
22.02.2013 03:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
