7 Series E38 L7 (M73) SAL
Expose connection point between front / rear sections of engine
support and between front section of engine support / end wall.
Drill out welding spots and open up welded seams.
Note:
View from engine compartment
Caution!
Do not damage rear section of engine support.
Expose connection point on underside between pipe / rear section
of engine support.
Open up welded seams.
Expose connection point between front section of engine support /
end wall inside vehicle.
Drill off spot welding.
Remove front section of engine support.
Align connection point between rear section of engine support /
end wall and grind down.
Align connection point between pipe on engine support and grind
down.
RA Replacing front section of engine support to left wheel arch
BMW AG - TIS
22.02.2013 04:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
