7 Series E38 L7 (M73) SAL
Straighten connection point between pipe / rear section of engine
support and grind down.
Adjust spare engine support with straightening angle set to fit.
Adjust spare partition wall-carrier plate to fit and mark out holes for
plug welding.
Remove engine support and partition wall-carrier plate.
Clean both sides of connection faces on spare engine support.
Drill out holes for plug welding in spare partition wall-carrier plate
and clean connection faces.
RA Replacing front section of left engine support
BMW AG - TIS
22.02.2013 04:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -