7 Series E38 L7 (M73) SAL
Drill out holes for plug welding reinforcement plates in the body.
Coat connecting faces on body and reinforcement plates with
zince dust paint.
Adjust and weld up reinforcement plates in connection point in
centre of rear apron.
Adjust spare outer section of rear apron to fit in vehicle.
Mark out holes for plug welding reinforcement plates in connection
point of centre rear apron and connection point of lower lamp
carrier.
Remove outer section of rear apron.
Drill out holes for plug welding reinforcement plates in connection
point of centre rear apron and connection point of lower lamp
carrier.
Coat all connecting faces of spare parts with zinc dust paint.
RA Replacing outer section of rear apron (partial replacement)
BMW AG - TIS
22.02.2013 04:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
