bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Adjusting Trunk Lid To Fit|Page 1863 > < 2 RA Adjusting Trunk Lid To Fit|Page 1861
Page 7
background image

Insert central key in and twist to left: this unlocks upper section of
trunk lid lock.

1 = upper section of trunk lid lock locked

2 = upper section of trunk lid lock unlocked

Caution!

Before closing the trunk lid, always check whether the upper
section of the trunk lid lock has been unlocked. There is
otherwise a risk of damaging the upper or lower section of the
trunk lid lock.

Adjustment of Soft Close Automatic

Subsequent procedure after any adjustment required on trunk lid
or after completion of preliminary work:

1. Check fulcrum pads on lower section of trunk lid lock for
damage and replace if necessary.

2. Close luggage compartment lid.

Check height of trunk lid relative to side panels and adjust if
necessary.

Trunk lid should close flush with side panels and must not
protrude beyond this

Tolerance - 1 mm, i.e. trunk lid may lie 1 mm below side panels.

Height adjustment of trunk lid:

Open trunk lid.

Remove trim piece from upper section of trunk lid lock.

For this, lift out expanding rivet (1) and remove finisher cover (2)
from trunk lid lock.

RA  Adjusting trunk lid to fit

BMW AG - TIS

22.02.2013  04:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 7 -

2 RA Adjusting Trunk Lid To Fit|Page 1863 > < 2 RA Adjusting Trunk Lid To Fit|Page 1861