bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1990 > < 4 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo
Page 2
background image

Up to 09/98:

Lift out lower edge of outside handle and pull obliquely downwards
to remove.

From 09/98:

Caution!

Optical entry aid! A fiber optics cable is connected to the
outside door handle.
Do not kink fiber optics cable.

Lift out outside door handle at bottom and pull out at an angle
approx. 5 cm towards bottom. 

Installation:

The bending radius of the fiber optics cable must not be less
than 20 mm.

From 09/98:

Detach inside plastic cover (1) from outside door handle.

From 09/98:

Release screw (1) and remove light output module (2) from
outside door handle.

RA  Removing and installing or replacing outside handle from left or right front doo

BMW AG - TIS

22.02.2013  05:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

4 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo|Page 1990 > < 4 RA Removing And Installing Or Replacing Outside Handle From Left Or Right Front Doo