bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 2001 > < 2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door
Page 2
background image

Installation:

Insert screwdriver (B) (0.4 x 2 mm) in locking plate (2) and pull
it backwards until the retaining tab (1) engages audibly.

Perform function check with opened rear door.

Up to 09/98:

Lift out lower edge of outside handle and pull obliquely downwards
to remove.

From 09/98:

Caution!

Optical entry aid! A fiber optics cable is connected to the
outside door handle.
Do not kink fiber optics cable.

Lift out outside door handle at bottom and pull out at an angle
approx. 5 cm towards bottom. 

Installation:

The bending radius of the fiber optics cable must not be less
than 20 mm.

From 09/98:

Detach inside plastic cover (1) from outside door handle.

RA  Removing and installing / replacing outside handle on left or right back door

BMW AG - TIS

22.02.2013  05:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 2001 > < 2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door