7 Series E38 L7 (M73) SAL
Remove cap (1).
Lift out locking unit and pull button (2) upwards to remove.
Installation:
Check gap (A) between cap (1) and guide (2).
(A) = 14.5
±
1 mm
If necessary, remove button and adjust sleeve (3).
Unclip door trim panel all around.
Pull door trim upwards out of door clip and slide door opener (1)
through the door trim panel.
RA Removing and installing left or right front door trim panel
BMW AG - TIS
22.02.2013 05:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
