7 Series E38 L7 (M73) SAL
Remove gasket (1) (front instrument panel) and (2) (heater).
Installation:
Install new gaskets (pressed and vacuum-packed) shortly
before installing the instrument panel.
If necessary, press old gasket (1) (if well preserved) between two
smooth wooden blocks and/or gasket (2) (if well preserved)
between two smooth angle irons under high pressure for approx.
15 minutes.
Installation:
Plastic guides (1) must be installed at left/ right and (2) centre.
Installation:
Ensure foam rubber section (1) is correctly located.
Check function.
RA Removing and installing dashboard trim panel
BMW AG - TIS
22.02.2013 05:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
