7 Series E38 L7 (M73) SAL
Unclip panel (1) over entire length and remove.
Note:
Plastic holders remain on longitudinal member.
Installation:
Before pressing, slide panel (1) under underfloor panel (2).
Detach plastic holders (1) from longitudinal member. Replace
plastic inserts (2) if necessary.
Installation:
Insert plastic holder (1) at specified points into panel (2).
Hold panel with plastic holders on longitudinal member and
check alignment with plastic inserts.
If necessary, align plastic holders.
RA Removing and installing or replacing panel for cover on left or right side membe
BMW AG - TIS
22.02.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
