7 Series E38 L7 (M73) SAL
Installation:
Set the supplied cover over the recess in the styrofoam.
Loosen the nuts (1) and clips (2), unclip the cable cover and turn it
around.
Unclip the required terminal connector from the holder.
Unclip the required terminal connector from the holder, pull out the
insulation housing and pull out the cable that is to be changed.
Note:
Work out and dispose of the old cable from the main wiring
harness up to the separating point.
RA Front left wiring harness repair
BMW AG - TIS
22.02.2013 07:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -