7 Series E38 L7 (M73) SAL
63 17 000
Removing and installing or replacing fog
lamp insert (complete)
Unclip headlight by inserting a screwdriver through upper
aperture.
Pull off connector. Disconnect steel-wire clamp and pull out light
bulb.
Caution!
Do not take hold of glass part of bulb with bare fingers. Only
grip light bulb on base and use either a clean cloth or the
lamp packaging.
RA Removing and installing or replacing fog lamp insert (complete)
BMW AG - TIS
22.02.2013 08:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
