7 Series E38 L7 (M73) SAL
Lever out actuator motor for left footwell flap.
Position footwell flap approx. horizontal and unhook linkage.
Unfasten screws (1), loosen nut (2) and pry out left and right
bracket.
Unclip and remove temperature sensor. Cut open cable ties on
the cover.
Installation note:
Secure wiring harness at existing mounting points on cover
with new cable ties.
RA Replacing heater core (air conditioner control)
BMW AG - TIS
22.02.2013 08:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
