7 Series E38 L7 (M73) SAL
65 52 ...
Removing and installing/replacing cassette
drive
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Release screws from on-board monitor trim.
Release screws (1).
Disconnect plug connection (2) from trim (3).
Pull cassette drive (1) in direction of arrow out of on-board
monitor (2).
Remove strip (3) from on-board monitor (2).
Installation:
Make sure cassette drive (1) is correctly guided (4) in on-board
monitor (2).
RA Removing and installing/replacing cassette drive
BMW AG - TIS
22.02.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
