7 Series E38 L7 (M73) SAL
67 66 520
Removing and installing / replacing drive unit
for rear lumbar support
Disconnect negative battery lead,
refer to 12 00 ...
Remove side section of back-rest,
refer to 52 25 008
Disconnect connector (1). Cut through cable connector (2) and
pull hose downwards to remove. Unfasten screw (3) and remove
lumbar support pump (4).
Installation:
Carry out operational check.
RA Removing and installing / replacing drive unit for rear lumbar support
BMW AG - TIS
22.02.2013 10:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
