bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Removing And Installing Or Replacing Airbag Module On Passenger Side|Page 2913 > < 11 RA Removing And Installing Or Replacing Airbag Module On Passenger Side|Page 2911
Page 4
background image

Install passenger airbag module but do not place on screw bolts
yet.

1 = Passenger airbag cover (airbag cover)

2 = Passenger airbag module

Installation:

Shown here with two retaining straps, same installation
location as with one retaining strap:

Retaining straps are on side turned away from passenger.

Insert plug in holder and lock.

Make sure plug is locked.

Place passenger airbag module on screw bolts.

1 = Passenger airbag cover (airbag cover)

2 = Passenger airbag module

Installation:

Shown here with two retaining straps, same installation
location as with one retaining strap:

Retaining straps are on side turned away from passenger.

Tighten nuts.

Installation:

Tightening Torque,

refer to Technical Data 72 12 9AZ.

Note:

Only one retaining strap is shown in this illustration.

RA  Removing and installing or replacing airbag module on passenger side

BMW AG - TIS

22.02.2013  10:18

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

11 RA Removing And Installing Or Replacing Airbag Module On Passenger Side|Page 2913 > < 11 RA Removing And Installing Or Replacing Airbag Module On Passenger Side|Page 2911