7 Series E65 730d (M57T2) SAL
11 31 505
Adjusting valve timing (M57T2)
Special tools required:
•
11 6 080
•
11 6 321
•
11 6 322
•
11 6 480
Necessary preliminary tasks:
•
Removing cylinder head cover
The cams on the inlet camshaft at the 1st cylinder point
downwards.
Release screw (1).
Note:
Bolt (1) must be removed beforehand as it is no longer
accessible in TDC position.
Tightening torque 11 31 1AZ
.
Remove protective cap in direction of arrow.
Installation:
Reinstall protective cap with some grease.
RA Adjusting valve timing (M57T2)
BMW AG - TIS
02.02.2013 15:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
