7 Series E65 730d (M57T2) SAL
12 51 200
Replacing wiring harness section for injectors
(M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove intake air manifold
Unfasten screws.
Take off holder (1).
Unfasten screws.
Remove cover (2).
Unfasten screws.
Remoev seal (3) towards top.
Unlock retaining bars (1) and remove.
Raise control unit (2).
Unlock control unit plug and disconnect.
Pull out lock (1) in direction of arrow.
Press out plug (2) in direction of arrow.
RA Replacing wiring harness section for injectors (M57T2)
BMW AG - TIS
02.02.2013 16:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
