Removing and Replacing Expansion Tank for Tank Ventilation
16 11 120
Removing and installing / replacing
expansion tank for tank ventilation
Necessary preliminary tasks:
•
Remove rear right wheel.
Observe safety instructions on raising the vehicle.
Remove rear right wheel arch trim.
Release hose clamps (1-3) and detach lines from expansion tank:
Installation:
Replace hose clamps.
(1)
Tank vent
(2)
Tank venting
(3)
Scavenging air line
Detach rubber hose (1) from connection (2).
Unfasten hose clip (3).
Detach line (4) from expansion tank.
Installation:
Replace hose clamps.
RA Removing and installing / replacing expansion tank for tank ventilation
BMW AG - TIS
02.02.2013 16:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
