7 Series E65 730d (M57T2) SAL
17 00 005
Draining and adding coolant (N52, M57T2)
Warning!
Danger of scalding!
Only carry out work on the cooling system after the engine
has cooled down!
Important!
Lifetime coolant filling:
If removing radiator, oil-water heat exchanger or transmission
oil cooler, do not reuse drained coolant!
Installation:
Use only recommended coolant.
Observe mixture ratio (antifreeze/water).
Recycling
Catch and dispose of drained coolant in a suitable container.
Observe country-specific waste-disposal regulations.
Risk of slipping due to coolant on the floor.
Necessary preliminary tasks:
•
Remove reinforcement plate
•
Follow instructions for working on cooling system.
RA Draining and adding coolant (N52, M57T2)
BMW AG - TIS
02.02.2013 16:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
