7 Series E65 730d (M57T2) SAL
Release screw.
Remove V-clamp (1).
Tightening torque 18 32 1AZ
.
Installation:
Replace V-clamp.
Release screws (1).
Tightening torque 24 00 1AZ
.
Remove catalytic converter (2).
Installation:
Replace seal.
Install catalytic converter (2) without tension.
If replacing:
Modify holder (3).
Check exhaust system for leaks.
RA Removing and installing/replacing catalytic converter (M57T2)
BMW AG - TIS
02.02.2013 17:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -