7 Series E65 730d (M57T2) SAL
Unlock plug (1) and disconnect (except M57).
Unclip cable holder (1) from transmission housing (except M57).
Unclip cable from transmission.
Perform following tasks:
•
Unlock and disconnect plug (1) by turning.
•
Insert special tool 24 2 390 in sealing sleeve.
The operations are described in Replacing mechatronics
(Important: Read and comply with important note!).
Supporting transmission:
Support with special tools 24 5 306 , 24 5 301 and 00 2 030 .
Set up special tool 24 5 306:
-
All supports to "B".
-
Supports 3 and 4 are at rear of transmission.
-
Support lettering points forwards.
RA Removing and installing automatic transmission (6HP26Z/6HP32Z)
BMW AG - TIS
02.02.2013 17:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
