7 Series E65 730d (M57T2) SAL
32 41 331
Replacing pressure line for power steering
(M57TU, M57T2)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off hydraulic lines with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
Release union screw and detach pressure line from vane pump.
Installation:
Replace sealing ring.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
RA Replacing pressure line for power steering (M57TU, M57T2)
BMW AG - TIS
02.02.2013 18:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
