7 Series E65 730d (M57T2) SAL
34 33 071
Replacing vacuum hose for brake booster
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the PA pipe.
Non-return valve and PA pipe are welded together and are
replaced together as a single unit.
Remove microfilter (1).
Release screws and remove cover (1).
Detach non-return valve (2) from brake booster.
Installation:
Make sure cover engages properly.
Release hose clip (1) and detach vacuum hose (2) from PA
pipe.
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster
BMW AG - TIS
02.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
