7 Series E65 730d (M57T2) SAL
41 61 014
Adjusting hood lid
Note:
Gap dimensions E65/E66 serve as basis for adjustment work.
Moving the hinges later on makes unpainted surfaces visible.
Touch these up in the appropriate color.
Check stop screw of hood lid hinge on left and right.
Plastic head of stop screw must not be damaged or missing,
replace hood lid hinge if necessary.
Slacken screws (1) on lock on left and right.
Parts must be able to be moved.
Loosen screws (1 and 2) on left and right hinges.
Hood lid must be able to be moved.
Note:
If adjustment range is not sufficient, slacken retaining screws
of hood hinge on body and move hinge.
RA Adjusting hood lid
BMW AG - TIS
02.02.2013 21:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -