7 Series E65 730d (M57T2) SAL
Release screws (1).
Important!
Bumper trim must not be pulled out sideways (risk of
damage).
Feed out cable for ultrasonic transducer and, with a 2nd person
helping, remove bumper trim (2) towards front.
Installation:
Observe gap dimensions.
RA Removing and installing/replacing front bumper trim (BMW ALPINA B7)
BMW AG - TIS
02.02.2013 21:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
