7 Series E65 730d (M57T2) SAL
51 23 110
Removing and installing/replacing left
hood/bonnet lock
Necessary preliminary tasks:
•
Remove left headlight
Disengage Bowden cable (1 and 2) from hood/bonnet
lock (3).
Release screws (1).
Remove hood/bonnet lock (2) towards front.
Tightening torque 51 23 2AZ
.
Installation:
If necessary, adjust engine hood/bonnet.
RA Removing and installing/replacing left hood/bonnet lock
BMW AG - TIS
02.02.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -