7 Series E65 730d (M57T2) SAL
51 24 149
Replacing valve on hydraulic unit
Necessary preliminary tasks:
•
Remove hydraulic unit for rear lid actuation
Release screws (1).
Detach valve (2) from hydraulic unit (3).
Tightening torque 51 24 9AZ
.
Installation:
Sealing rings (1) on valve (2) must not be damaged.
Installation:
No dirt may enter bore (1) on hydraulic unit (2).
Check fluid level.
RA Replacing valve on hydraulic unit
BMW AG - TIS
02.02.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
