bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing_replacing Panel For Active Knee Protector On Left|Page 1841 > < 7 RA Removing And Installing_replacing Panel For Knee Protector On Left
Page 1
background image

51 45 177

Removing and installing/replacing panel for
active knee protector on left

Warning!

Observe safety regulations for handling airbag modules and
pyrotechnical seatbelt tensioners.

Incorrect handling can activate airbag and cause injury.

Follow instructions for disconnecting and connecting battery.

Disconnect battery negative lead.

Remove middle instrument panel trim.

Remove lighting control unit.

Remove trim panel for pedal assembly.

Turn plug connection (1) approx. 30

°

 counterclockwise and

remove from holder (2).

Unfasten plug connection (1) and disconnect.

Release screws (1).

Installation:

Tightening torque, 51 45 1AZ .

RA  Removing and installing/replacing panel for active knee protector on left

BMW AG - TIS

02.02.2013  23:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Removing And Installing_replacing Panel For Active Knee Protector On Left|Page 1841 > < 7 RA Removing And Installing_replacing Panel For Knee Protector On Left