7 Series E65 730d (M57T2) SAL
Unclip trim in upper rail on outside (1) towards top, feed out
towards rear and remove.
Note:
For purposes of clarity, illustration shows seat frame folded up.
Disconnect plug connections (1).
Unlock catches (2) towards rear, feed out control unit for seat
adjustment (3) in direction of arrow and remove.
Installation:
Make sure mounts (1) and retaining lugs (2) of control unit for
seat adjustment (3) are correctly seated.
Replacement:
Carry out coding/programming.
Observe following IDC specifications:
•
Programming
•
Coding
•
Car & Key Memory
•
CD "CIP"
RA Removing and installing (replacing) control unit for left or right seat adjustme
BMW AG - TIS
03.02.2013 01:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
