7 Series E65 730d (M57T2) SAL
67 33 510
Removing and installing/replacing servolock
drive
Necessary preliminary tasks:
•
Remove trim for tail panel at top
Unfasten plug connection (1) and disconnect.
Turn plug housing (2) approx. 45
°
in direction of arrow and
unclip.
Release screws (3) and remove servolock drive (4).
Installation:
•
Adjust rear lid lock
RA Removing and installing/replacing servolock drive
BMW AG - TIS
03.02.2013 04:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -