7 Series E65 730d (M57TU) SAL
11 21 500
Replacing crankshaft (M57TU)
Special tools required:
•
00 9 120
•
11 2 110
Necessary preliminary tasks:
•
Remove engine.
•
Remove timing case cover.
•
Remove oil pump.
•
Remove end cover at rear.
•
Remove conrod bearing.
Important!
Replace main bearing and conrod bearing bolts.
Replace main bearing and conrod bearing shells.
There must be no oil in the blind holes (risk of cracking).
Unfasten screws.
Remove reinforcement shell (1).
RA Replacing crankshaft (M57TU)
BMW AG - TIS
04.02.2013 00:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -