7 Series E65 730d (M57TU) SAL
11 31 001
Replacing camshafts (M57TU)
Special tools required:
•
00 9 120
•
11 2 300
•
11 3 340
•
11 6 320
•
11 6 321
•
11 6 322
•
11 6 480
Necessary preliminary tasks:
•
Remove vacuum pump.
•
Remove cylinder head.
•
Drain coolant.
•
Remove A/C compressor drive belt.
•
Remove alternator drive belt.
•
Remove EGR heat exchanger.
Caution!
Replace camshaft bolts.
Replace bearing pins on timing chain.
Do not wash off bolt coating.
Release screws (1).
Remove suspension lug (2).
Release screws (3).
Remove return pipe (4).
Note:
Illustrations show M57.
RA Replacing camshafts (M57TU)
BMW AG - TIS
04.02.2013 00:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -