7 Series E65 730d (M57TU) SAL
Important!
Do not damage sealing surface.
Cut through connecting links (1) of gasket (2) with a small cross-
cut chisel (3).
Remove gasket.
Clean sealing surface.
Installation:
Before fitting, first position new gasket on sealing surface on
engine block and check for correct seating.
Assemble engine.
RA Removing and installing or replacing water pump (M47TU/M57TU)
BMW AG - TIS
04.02.2013 00:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
