7 Series E65 730d (M57TU) SAL
11 53 000
Removing and installing or replacing coolant
thermostat (M57TU)
Necessary preliminary tasks:
•
Drain coolant.
•
Remove fan.
•
Remove EGR cooler.
Recycling:
Catch and dispose of coolant in a suitable container.
Observe country-specific waste-disposal regulations.
Lever out lock (1)
Lever out lock (2) and detach water hose.
Release screws (3), carefully remove thermostat housing to one
side.
Risk of damage to water pipe (1)
Note:
Coolant thermostat is integrated in coolant-thermostat housing
and can only be replaced as a complete assembly.
Installation:
Clean sealing surfaces.
Replace gasket (1).
RA Removing and installing or replacing coolant thermostat (M57TU)
BMW AG - TIS
04.02.2013 00:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
