7 Series E65 730d (M57TU) SAL
Release contact screws (1).
Remove controller switch (2).
Note:
M57TU only:
Release contact screws (1).
Unscrew nut (2).
Remove controller switch (3).
Note:
M57 and M57TU:
Check contact surfaces (1) of slip rings for wear and recondition
if necessary.
Note:
M57 and M57TU:
Press in carbon brushes (1) of controller switch (2) in direction
of arrow.
Install controller switch (2).
RA Replacing controller switch for alternator (M57)
BMW AG - TIS
04.02.2013 01:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -