7 Series E65 730d (M57TU) SAL
16 11 030
Removing and installing fuel tank
Special tools required:
•
16 1 060
Caution!
After installation of fuel tank/prior to first engine start-up:
Check the electrical resistance between the ground lug (tank
filling pipe) and the wheel hub.
Measured value approx. 0.6
Ω
Fill fuel tank with min. 5 l fuel.
Draw off fuel from fuel tank.
Remove rear right wheel.
Remove rear right wheel arch trim.
Remove heat shield (1) from tank.
Remove complete propeller shaft.
Release screws (1).
Remove lip (2) at rear left.
RA Removing and installing fuel tank
BMW AG - TIS
04.02.2013 01:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -